Thermally induced formation of PCDD and PCDF from tri- and tetrachlorobenzene in dielectric fluids

The thermal behavior of dilute (5000-50 ppm) solutions of tri- and tetrachlorobenzene in mineral oil, silicone oil, and tetrachloroethylene (TCE) has been investigated. Although pyrolyses or combustion of neat chlorobenzenes readily forms significant yields of PCDDs/PCDFs, corresponding treatment of dilute solutions was generally non-productive. This result is consistent with the proposition that, under the conditions studied, the rate-limiting step for PCDD/PCDF formation is bimolecular in chlorobenzene. In contrast, earlier studies of PCBs implied a rate-limiting step that was unimolecular in chloroaromatics. Combustion of dilute solutions of chlorobenzenes in tetrachloroethylene did produce detectable concentrations of PCDF; this result reflects combination of chlorobenzene and TCE- or TCE-derived species.     

Impact of climatic conditions on irrigation water requirements and hydraulic characteristics of modern irrigation systems

Irrigation system performance regards as a function of climatic conditions. The present study was carried out to study this phenomenon. Sugar beet and sesame corps were cultivated during two agricultural seasons of 2017/2018 and 2018/2019 irrigated with drip and sprinkler systems. The drip and sprinkler systems performance was evaluated in terms of hydraulic characteristics added to irrigation water requirements. The recorded monthly values were compared to the traditional estimation method. The results revealed that irrigation system efficiency was increased by increasing ambient temperature for the drip irrigation system, and vice versa was noticed with the sprinkler irrigation system. Emission uniformity and application efficiency of emitters were increased by increasing ambient temperature. While the sprinkler flow rate and distribution uniformity were decreased by increasing ambient temperature. For drip irrigation system, the average total amount of irrigation water requirements using traditional estimation for sugar beet (2372 m³/fed) was less than the actual calculated (2439 m³/fed), while for sesame crop, the traditional estimation method (2556 m³/fed) was higher than actual calculated (2477 m³/fed). Using a sprinkler system, the average total amount of irrigation water requirements by the traditional estimation (2689 and 2897 m³/fed) was less than the actual calculated (2709 and 3044 m³/fed) for sugar beet and sesame crops, respectively. So, it is important to consider the effects of climatic conditions through the agricultural season.

     

Evidence for contact sex recognition pheromone of the Asian longhorned beetle,<Emphasis Type="Italic"> Anoplophora glabripennis</Emphasis> (Coleoptera: Cerambycidae)

Field observations of the Asian longhorned beetle (Anoplophora glabripennis) mating behavior in China suggested that a female-produced contact pheromone was almost certainly involved in sex recognition. Gas chromatography–mass spectrometry (GC-MS) analysis of A. glabripennis adults' whole body cuticular extracts indicates that a series of long-chain hydrocarbons comprise the cuticular waxes of both sexes. Although for the most part the GC profiles are similar for the two sexes, five monounsaturated compounds were consistently more abundant in samples from females than in those from males. These compounds were identified as (Z)-9-tricosene, (Z)-9-pentacosene, (Z)-7-pentacosene, (Z)-9-heptacosene, and (Z)-7-heptacosene in the approximate ratio of 1:2:2:8:1, respectively. Antennal and palpi contact to a polypropylene micro-centrifuge tube coated with a synthetic mixture of the five compounds stimulated copulatory behavior in males.Electronic Supplementary Material  Supplementary material is available for this article if you access the article at . A link in the frame on the left on that page takes you directly to the supplementary material.     

Comparison of a Subjective and a Physical Approach for Identification of Priority Areas for Soil and Water Management in a Watershed – A Case Study of Nagwan Watershed in Hazaribagh District of Jharkhand, India

The present investigation was an attempt to compare the within-watershed prioritization capabilities of a physical model based SDSS with the SYI and RPI model based subjective-SDSS, conventionally devised for between-watershed prioritizations, by All India Soil Survey and Land Use Planning Division of Ministry of Agriculture, Government of India. Application of these two approaches on a test watershed situated in Damodar-Barakar catchment in India, the second most seriously eroded area in the world, demonstrated that the proposed physical model based SDSS was capable of realistically and logically mimicking the sub-watershed-scaled water and soil losses thereby suggesting its immense application potential for priority area identification within the test watershed. In contrast to the proposed physical method, the subjective approaches, which assigned totally reverse priorities to about 67–93% of the test-sub-watersheds, were observed to be incapable of realistically assessing the impact of topography and varied land use and soil types in the test watershed on their sub-watershed scaled run-off and soil loss generating potential. Besides, the physical approach could be used for assessing the annual dynamics of the total water and sediment yields, under prevailing resource management systems in the test watershed with good to moderately good correlation coefficients of 0.83 and 0.65; model efficiency coefficients of 0.54 and 0.70; mean relative errors of –4.28% and –17.97% and root mean square prediction errors of 71.8 mm and 9.63 t/ha, respectively.     

Sequestration of toxic Pb(Ⅱ) ions by chemically treated rubber(Hevea brasiliensis) leaf powder

Rubber leaf powder(an agricultural waste) was treated with potassium permanganate followed by sodium carbonate and its performance in the removal of Pb(Ⅱ) ions from aqueous solution was evaluated.The interactions between Pb(Ⅱ) ions and functional groups on the adsorbent surface were confirmed by Fourier transform infrared(FT-IR) spectroscopy,scanning electron microscopy(SEM) coupled with X-ray energy dispersive spectroscopy(EDX).The effects of several important parameters which can affect adsorption capacity such as pH,adsorbent dosage,initial lead concentration and contact time were studied.The optimum pH range for lead adsorption was 4-5.Even at very low adsorbent dosage of 0.02 g,almost 100% of Pb(Ⅱ) ions(23 mg/L) could be removed.The adsorption capacity was also dependent on lead concentration and contact time,and relatively a short period of time(60-90 min) was required to reach equilibrium.The equilibrium data were analyzed with Langmuir,Freundlich and Dubinin-Radushkevich isotherms.Based on Langmuir model,the maximum adsorption capacity of lead was 95.3 mg/g.Three kinetic models including pseudo first-order,pseudo second-order and Boyd were used to analyze the lead adsorption process,and the results showed that the pseudo second-order fitted well with correlation coefficients greater than 0.99.     

People’s dependency on forest resources and contributions of forests to the livelihoods: a case study in Chittagong Hill Tracts (CHT) of Bangladesh

The study was conducted to investigate people’s forest dependency and contributions of forests to the livelihoods in the three hill districts of Chittagong Hill Tracts (CHT), Bangladesh. The study revealed that forest resources contribute significantly to rural community’s livelihoods and economic well-being. Using generalized logistic regressions, this study has also investigated the socioeconomic factors that affect people’s dependency on forest resources of CHT. The study revealed that people’s income from forest and forest-related occupation was positively aligned with their forest dependency. However, their education level significantly reduced their dependency on forest resources. Thus, educating the forest-dependent people and supporting alternative income generation activities should be appreciated for effective forest management in CHT. This study will be helpful to forest and environmental policy makers for CHT.     

Vertical distribution and contamination assessment of heavy metals in sediment cores of ship breaking area of Bangladesh

Environmental Geochemistry and Health - Vertical heavy metal profiling reflects the history of the deposition of metals and helps to understand the characteristics of accumulation in various layers...     

Synthesis and Characterization of Chitosan-Grafted-Poly(2-Hydroxyaniline) Microstructures for Water Decontamination

Chitosan as a biopolymer, biodegradable, safe, non-toxic and widely abundant in nature was grafted with poly(2-hydroxyaniline) (P2-HA) through aqueous chemical oxidative copolymerization using ammonium persulphate in acetic acid medium. The grafting conditions were studied by varying grafting parameters. The effect of oxidant, 2-hydroxyaniline (2-HA) and acetic acid concentrations on the rate of copolymerization was studied. The synthesized graft characterized using UV–Vis, FTIR, TGA, XRD, and scanning electron microscope and compared with chitosan and P2-HA. The grafting enhances the thermal properties of chitosan. The effect of temperature on the rate of grafting copolymerization reaction was studied. The apparent activation energy (Ea) of the copolymerization reaction found to be 21.1116 kJ/mol. Also, ΔH^* and ΔS^*, were calculated and found to 22.8630 kJ/mol and ?109.4290 J/mol K respectively. The mechanism of the grafting copolymerization reaction discussed. Chitosan, P2-HA and chitosan-graft-P2-HA used for the removal of Cr, Fe, Mn, Cu and Zn divalent ions from a contaminated water samples. The adsorption isotherm parameters are given.     

Mechanistic understanding of human–wildlife conflict through a novel application of dynamic occupancy models

Crop and livestock depredation by wildlife is a primary driver of human–wildlife conflict, a problem that threatens the coexistence of people and wildlife globally. Understanding mechanisms that underlie depredation patterns holds the key to mitigating conflicts across time and space. However, most studies do not consider imperfect detection and reporting of conflicts, which may lead to incorrect inference regarding its spatiotemporal drivers. We applied dynamic occupancy models to elephant crop depredation data from India between 2005 and 2011 to estimate crop depredation occurrence and model its underlying dynamics as a function of spatiotemporal covariates while accounting for imperfect detection of conflicts. The probability of detecting conflicts was consistently <1.0 and was negatively influenced by distance to roads and elevation gradient, averaging 0.08–0.56 across primary periods (distinct agricultural seasons within each year). The probability of crop depredation occurrence ranged from 0.29 (SE 0.09) to 0.96 (SE 0.04). The probability that sites raided by elephants in primary period t would not be raided in primary period t + 1 varied with elevation gradient in different seasons and was influenced negatively by mean rainfall and village density and positively by distance to forests. Negative effects of rainfall variation and distance to forests best explained variation in the probability that sites not raided by elephants in primary period t would be raided in primary period t + 1. With our novel application of occupancy models, we teased apart the spatiotemporal drivers of conflicts from factors that influence how they are observed, thereby allowing more reliable inference on mechanisms underlying observed conflict patterns. We found that factors associated with increased crop accessibility and availability (e.g., distance to forests and rainfall patterns) were key drivers of elephant crop depredation dynamics. Such an understanding is essential for rigorous prediction of future conflicts, a critical requirement for effective conflict management in the context of increasing human–wildlife interactions.     

Monitoring bacterial contamination of piped water supply in rural coastal Bangladesh

Safe drinking water is scarce in southwest coastal Bangladesh because of unavailability of fresh water. Given the high salinity of both groundwater and surface water in this area, harvested rainwater and rain-fed pond water became the main sources of drinking water. Both the government and non-government organizations have recently introduced pipe water supply in the rural coastal areas to ensure safe drinking water. We assessed the bacteriological quality of water at different points along the piped water distribution system (i.e., the source, treatment plant, household taps, street hydrants, and household storage containers) of Mongla municipality under Mongla Upazila in Bagerhat district. Water samples were collected at 2-month interval from May 2014 to March 2015. Median E. coli and total coliform counts at source, treatment plant, household taps, street hydrants, and household storage containers were respectively 225, 4, 7, 7, and 15 cfu/100 ml and 42,000, 545, 5000, 6150, and 18,800 cfu/100 ml. Concentrations of both of the indicator bacteria reduced after treatment, although it did not satisfy the WHO drinking water standards. However, re-contamination in distribution systems and household storage containers indicate improper maintenance of distribution system and lack of personal hygiene.